Built for every terrain

The all-terrain electric pallet truck built for rough UK sites, outdoor yards, and heavy-duty material movement.

Discover AT30

All-Terrain Performance

Electric Zero Emissions

Built To Last Industrial Strength

UKCA / CE UK parts support Weatherproof electrics 51.2V lithium Built for UK sites

AEGIS AT30 Core working on rough construction ground

Applications

Designed for the surfaces that stop ordinary pallet trucks.

Standard pallet trucks are built for smooth floors. The AT30 is built for gravel, broken tarmac, muddy yards and construction tracks.

Builders' merchants moving block, stone and timber packs
Farm yards handling feed, supplies and outdoor pallets
Construction sites crossing temporary tracks and uneven ground
Industrial yards handling heavy loads in poor weather

Meet the lineup

Three configurations. One heavy-duty all-terrain platform.

Pure Off-Road Capability

AEGIS AT30 Core

Open-frame front chassis with 100mm clearance for gravel, mud and uneven construction tracks without low-hanging obstructions.

Best for: construction sites, unpaved farm yards, timber pads, and temporary outdoor venues.

Impact-Guarded Efficiency

AEGIS AT30 Guarded

Wraparound steel shroud protects the drive assembly and wiring in busy yards, masonry bays and factory areas.

Best for: paved concrete industrial yards, stone masons, factory bays, and busy builders' merchants.

High-Frequency Ride-On Crossover

AEGIS AT30PS Pilot

Fold-down operator platform for longer site runs, folding upright again for tight pedestrian handling.

Best for: multi-acre distribution terminals, airport logistics hubs, and sprawling supply depots.

View Full Technical Comparison Table

Forklift comparison

Not a forklift replacement. A smarter tool for the jobs forklifts struggle with.

For jobs where forklifts are too expensive, too large, too heavy, or awkward to transport.

No forklift licence required

Pedestrian-operated handling without full forklift operator requirements.

Tail-lift friendly

From 207kg lithium Core to 280kg lead-acid Pilot depending on configuration, so it can travel with delivery fleets.

Lower capital cost

3-tonne material movement without the cost of a full forklift.

Tighter turning

Approx. 1530mm-1620mm turning radius depending on configuration for compact yards and storage lanes.

Less surface damage

No heavy counterweight, reducing pressure on paving, tarmac, and softer yards.

See the commercial logic behind the AT30 platform.

Compare AT30 against a forklift

Engineering advantage

Built beyond standard pallet trucks.

Engineered for rough UK site conditions: wet weather, grit, mud, cold starts, uneven ground, and heavy outdoor loads.

3TLoad capacity

Up to 100mmGround clearance

350x100mmDrive wheel

4-proofThrottle switch

-40°CSilicone wiring

50mmPiston rod

Ground clearanceOpen-frame chassis with up to 100mm clearance.

AEGIS AT30 350x100mm drive wheel closeup

Drive wheelOversized 350x100mm solid traction tire.

AEGIS AT30 guarded drive assembly closeup

Guarded chassisSteel protection around the drive assembly.

See the deeper engineering breakdown.

View engineering advantage

Technical specs

Heavy-duty DNA across every AT30 configuration.

Load capacity3,000kg

Heavy outdoor pallet handling capacity.

Powertrain48V / 1kW

High-torque brushless drive with 0.8kW lift power.

Drive wheel350x100mm

Oversized solid rubber traction tire for rough ground.

Control unitFour-proof

Dustproof, waterproof, shockproof and burn-resistant switchgear.

Battery51.2V lithium

Premium 30Ah smart lithium-ion upgrade, with 48V lead-acid options up to 52Ah on Pilot.

Hydraulics50mm

Reinforced piston rod paired with heavy-duty lift power.

Model differences

Same core platform. Critical configuration differences.

Feature / Model	AT30 Core	AT30 Guarded	AT30 Pilot
Operating Style	Pedestrian walk-behind	Pedestrian walk-behind	Ride-on / fold-flat platform
Front Protection	High-clearance open frame	Wraparound steel armor shroud	Guarded assembly
Turning Radius	1550 / 1620mm	Approx. 1550 / 1620mm, final build dependent	1530 / 1600mm
Service Weight	207kg lithium / 230kg lead-acid	Final build dependent	239kg lithium / 262-280kg lead-acid
Front Ground Clearance	Pure 100mm leading-edge clearance	Guarded drive assembly with protective lower shroud	Guarded drive assembly with platform chassis
Best Surface Match	Unpaved mud, dirt, track lips	Concrete yards, masonry bays	Sprawling multi-acre hubs

View detailed platform data

Load centre distance	600mm
Fork height range	85mm minimum / 200mm maximum
Travel speed	4km/h laden / 4.5km/h unladen
Lifting speed	15mm/s laden / 19mm/s unladen
Brake system	Electronic / electromagnetic braking depending on configuration
Operating style	Pedestrian walk-behind or optional stand-on Pilot platform

Built-in operator safety

3-tonne power. Pedestrian control built in.

Layered mechanical and electronic safety systems help operators stay in control under 3-tonne loads.

Emergency Reverse Switch

Stops reverse drive and moves the truck away if the tiller contacts the operator.

Dead-Man Handle Braking

Releases, vertical tiller movement, or loss of grip trigger automatic braking.

Protected Drive Chassis

Steel chassis helps shield the drive wheel and reduces foot exposure.

Controlled Walking Speed

Limited travel speed improves control and reaction time under load.

Built for H&S conversations, site managers, and procurement reviews.

View operator safety

Global engineering. Local support.

Built on proven machinery expertise. Backed here in the UK.

Global platform. UK-ruggedized specification. Local delivery, parts, warranty guidance, and support.

Read the story

Fleet pricing

Ready to upgrade your material handling?

Get model guidance, fleet pricing, trade discounts, and configuration advice for your site.

UK-backed support Compliance documentation guidance Parts and warranty network

View compliance & support